{ REXSHIELD }
RexShield 1090 Metal Gelcoat
1090 – Glossy Metal/Gelcoat Protectant Sealer (anti-corrosion) – 8-oz Sample
RexShield 1090 General Purpose Metal Coating Anti-Corrosion
RexShield 1090 is a hybrid silicon-ceramic coating designed to bond on the molecular level with metal substrates. The resulting surface of the REXSHIELD 1090 coated substrate exhibits extreme protection against oxidation, microbial intrusion, chemical corrosion, and ultraviolet degradation.
Various larger sizes and bulk ordering available upon request.
8 Ounces| 1 Pint | 1 Quart | 1 Gallon + Bulk
$40.00
Additional information
| Size | 08 oz |
|---|---|
| Product Line | 1090 – Glossy Metal/Gelcoat Protectant Sealer – 8-oz Sample |
Product Benefits
- Friction across the REXSHIELD 1090 coated surface decreases on average of 18-20%, resulting in an increased durability and longevity of the coated surface.
- Demonstrates an increased flow rate of both liquid and gaseous substances across its surface versus a non-coated metal surface.
Additional Benefits
- Protection against oxidation, microbial intrusion, chemical corrosion, and ultraviolet degradation.
Uses
All Metals Surface Sealer Coating
Specifications
Downloads
Need Help?
Give us a call!
Additional FAQ's
Precautions for Painted Surfaces/Surface Preparation
All existing coatings
must be free of water and water vapor prior to the application of REXSHIELD 1090. Surfaces that are glossy should be dulled with 1000 to 1200
grit sandpaper, careful not to break through to color, or use Scotch Brite. Hydro blasting or sandblasting is only recommended on bare metal
surfaces. If chemical abrasion or preparation is used on the substrate, the pH of the substrate must be neutralized before the application of the
REXSHIELD 1090. A pH level between the range of 6 to 8 is most optimal for the correct bonding of the REXSHIELD 1090 to the substrate to
be coated.
Mixing of REXSHIELD 1090
The components are packaged in two bottles labeled (A) and (B).
Remove the caps and the heat seals from the two bottles and carefully pour the contents of (B) into the bottle of (A). As the contents are pre-packaged in exact amounts for proper catalyzation to occur, it is vital to empty the entire contents of (B) into (A) and not to spill (B) during the process.
Replace the cap on the (A) bottle and shake for a period of at least three minutes to mix.
Application of REXSHIELD 1090
The surface to be coated with REXSHIELD 1090 must be clean, free from all oil and silicone residue, free from heavy and loose oxidation, and free from water and water vapor.
Do not induce heat to the substrate. Ensure that any operation temperature or fabrication temperatures such as those induced from welding have returned to ambient. Once REXSHIELD 1090 has been correctly mixed, you are now ready to apply with brush, roller, cloth, pad, or spray with a HVLP spray gun. Apply through layers of thin coats until a final coating exists of approximately 2 mils thick wet.
You must be logged in to post a review.
Welcome to RexPro Sealers & Coatings
RexPro Sealers & Coatings offers an innovative line of coatings for a variety of substrates such as Interior Flooring, All Vinyl Surfaces (VCT), Hardscapes (pavers, concrete, and building materials), Industrial and Residential, Boats and other Marine Vessels, and Oil and Gas.
Headquarters
RexPro Sealers & Coatings
1097 Jupiter Park Lane, Bldg. 8
Jupiter, Florida 33458
PHONE: 561-328-6691
Sealers & Coating Products to Protect any Surface!
- RexShield Multi-Surface
- RexShield Tile & Grout
- RexShield LVP/LVT
- RexShield Stone & Pavers
- RexShield Expoxy Flake
- RexShield Metal Restoration
- RexShield Countertops
- RexShield Concrete
- RexShield Vinyl
- RexShield Wood Teak Sealer
Customer Service
Request Information!
Your data is NEVER sold or shared.
DIYer or a Professional Contractor?
RexPro Sealers are designed to prevent common substrate issues, and provides maximum protection against the elements.
1 review for RexShield 1090 Metal Gelcoat