FAQ’s

RexPro Sealers & Coatings Product FAQ’s

View Resources

Have a Queston?

FREQUENTLY ASKED QUESTIONS

Here, you will find answers to the most common questions about our products, their applications, and the advanced chemistry that makes them superior.

If you have any additional questions, feel free to contact our customer support team.

Product Help

Product Lines FAQ’s

Product Lines (?)
Product Sheets

We Can Help!

Give us a call!

561-328-6691
View Videos

Product Lines - We generally start with 2 questions...

1. What’s the surface you’re looking to seal? – The answer here will generally tell us if the surface is porous or non-porous as this first question is actually twofold (what type of surface and is it porous or non-porous?).

2. What sheen do you want – glossy or close to its current state?

All our product lines are ONE COAT ONLY, the application technique is the same and at the end of the day after their full cure, they provide all the same benefits and pass the same ASTM Standards.

For example, chemical resistance, crosshatch adhesion, pencil hardness, scrub resistance.

1-Part Product Line (NEW)

Works on porous and non-porous surfaces, Glossy sheen only (currently), newest technology so crosslinks fastest.

  • Pros: dries fastest, reaches 9H hardness fastest, best scratch resistance, no mixing of product, long pot life, best product for a quick turnaround, 24-48 full cure vs 7-day cure
  • Cons: may dry too fast for some, very little window of time to fix streaks/mistakes/walk throughs
Product Info

2-Part Affinity Product Line

Only works on non-porous surfaces, Glossy sheen & Chameleon (CLOSELY mimics existing sheen), 2nd to newest technology, “our middle child” product line.

  • Pros: very user friendly, dries fairly fast, mixing is easy (less than 5 minutes), 7–14-day pot life, 2 sheens to choose from, reaches 9H hardness sooner than 3-Part Legacy Product Line
  • Cons: only for non-porous surfaces unless combined with ProSeal line as a primer, 7-day full cure
Product Info

3-Part Legacy Product Line

Works on porous and non-porous surfaces, Glossy & Satin sheen, oldest technology “legacy” so crosslinks slowest.

  • Pros: been around forever, 2 sheens to choose from, have up to 3 days to use Isopropyl Alcohol as a stripping agent, works on almost every surface type (except wood and asphalt)
  • Cons: have to mix 3 components that can take up to 90 minutes to complete, shortest pot life’s – Glossy 7-days, Satin 6 HOURS, dries the slowest, 7-day full cure
Product Info

1-Part Product Line *NEW

Product Sheets, usage Tips and FAQ’s

A1 Floors
1-Part Product Line
Spec Sheet
A1 Multi-Surface
1-Part Product Line
Spec Sheet

2-Part Affinity Product Line

Product Sheets, usage Tips and FAQ’s

Affinity "The Chameleon"
2-Part Affinity Product Line
SPEC Sheet
FAQ's & Tips
Glossy Affinity
2-Part Glossy Affinity Product Line
SPEC Sheet
FAQ's & Tips

3-Part Legacy Product Line

Product Sheets, usage Tips and FAQ’s

3-Part Glossy

3-Part Legacy Product Line

SPEC Sheet
FAQ's & Tips
3-Part Satin

3-Part Legacy Product Line

SPEC Sheet
FAQ's & Tips

V-Shield, CounterGuard, 1090 & ProSeal Product Line

Product Sheets, usage Tips and FAQ’s

V-Shield

–

SPEC Sheet
FAQ's & Tips
CounterGuard
CounterGuard Line
Spec Sheet
1090 (Metal/Gelcoat/Anti-Corrosive)
1090 (Metal/Gelcoat/Anti-Corrosive) Product
TDS Sheet
Intro Sheet
ProSeal
ProSeal Product Line
Spec Sheet
ProSeal Plus
ProSeal Product Line
Spec Sheet

General Products

Product Sheets, usage Tips and FAQ’s

Safety Clean

Safety Clean Product

Spec Sheet
Ruff-N-Tuff
Ruff-N-Tuff Product
TDS Sheet

RexPro
Sealers & Coatings

Maximum Protection Against The Elements

Through extensive research and development RexPro Sealers & Coatings has adapted space age science for modern needs. Our unique formulas have been created to fill the need for longer lasting reliable coatings for industrial, commercial and residential uses.

Request Info