{ REXSHIELD }

REXPRO Sealers & Coatings

RexShield 1090 Metal Gelcoat Anti-Corrosive Gallon Bottle
RexShield 1090 Metal Gelcoat Anti-Corrosive Quart Bottle
RexShield 1090 Metal Gelcoat Anti-Corrosive Pint Bottle
RexShield 1090 Metal Gelcoat Anti-Corrosive 8oz Sample Bottle
RexShield -Counterguard 1090 Stone Coat Countertops Sealer Products

RexShield 1090 Metal Gelcoat

1090 – Glossy Metal/Gelcoat Protectant Sealer (anti-corrosion) – 8-oz Sample
RexShield 1090 General Purpose Metal Coating Anti-Corrosion

RexShield 1090 is a hybrid silicon-ceramic coating designed to bond on the molecular level with metal substrates. The resulting surface of the REXSHIELD 1090 coated substrate exhibits extreme protection against oxidation, microbial intrusion, chemical corrosion, and ultraviolet degradation.

Various larger sizes and bulk ordering available upon request.
8 Ounces| 1 Pint | 1 Quart | 1 Gallon + Bulk

$40.00

Additional information

Size

08 oz
Product Line

1090 – Glossy Metal/Gelcoat Protectant Sealer – 8-oz Sample

Product Benefits

  • Friction across the REXSHIELD 1090 coated surface decreases on average of 18-20%, resulting in an increased durability and longevity of the coated surface.
  • Demonstrates an increased flow rate of both liquid and gaseous substances across its surface versus a non-coated metal surface.

Additional Benefits

  • Protection against oxidation, microbial intrusion, chemical corrosion, and ultraviolet degradation.

Uses

All Metals Surface Sealer Coating

Specifications

Downloads

TDS Sheet

Need Help?

Give us a call!

561-328-6691
RexShield -Counterguard 1090 Stone Coat Countertops Sealer Products

Additional FAQ's

Ready-to-Use RexShield 1090 General Purpose Metal Coating Anti-Corrosion?
Intro Sheet
Precautions for Painted Surfaces/Surface Preparation
REXSHIELD 1090 must be applied over a sound clean surface free of loose or flaking existing coatings and must be free of oil and silicon residues. Existing coatings must be 100% cured to manufacturer specifications prior to the application of REXSHIELD 1090.

All existing coatings
must be free of water and water vapor prior to the application of REXSHIELD 1090. Surfaces that are glossy should be dulled with 1000 to 1200
grit sandpaper, careful not to break through to color, or use Scotch Brite. Hydro blasting or sandblasting is only recommended on bare metal
surfaces. If chemical abrasion or preparation is used on the substrate, the pH of the substrate must be neutralized before the application of the
REXSHIELD 1090. A pH level between the range of 6 to 8 is most optimal for the correct bonding of the REXSHIELD 1090 to the substrate to
be coated.

Mixing of REXSHIELD 1090
REXSHIELD 1090 is a coating that is pre-measured and pre-packaged under argon gas. Once opened and exposed to the atmosphere, the two components of the coating must be mixed and catalyzed at one time in their entirety.

The components are packaged in two bottles labeled (A) and (B).

Remove the caps and the heat seals from the two bottles and carefully pour the contents of (B) into the bottle of (A). As the contents are pre-packaged in exact amounts for proper catalyzation to occur, it is vital to empty the entire contents of (B) into (A) and not to spill (B) during the process.

Replace the cap on the (A) bottle and shake for a period of at least three minutes to mix.

Application of REXSHIELD 1090
We recommend applying REXSHIELD RUFF-N-TUFF surface preparation solution, with a coarse grain cloth, allowing the REXSHIELD RUFF-N-TUFF to remain on the surface for a period of at least 5 minutes. On surfaces that contain heavy oxidation, we recommend sandblasting, grinding, wire brushing or sanding the surface prior to the application of the REXSHIELD RUFF-N-TUFF.

The surface to be coated with REXSHIELD 1090 must be clean, free from all oil and silicone residue, free from heavy and loose oxidation, and free from water and water vapor.

Do not induce heat to the substrate. Ensure that any operation temperature or fabrication temperatures such as those induced from welding have returned to ambient. Once REXSHIELD 1090 has been correctly mixed, you are now ready to apply with brush, roller, cloth, pad, or spray with a HVLP spray gun. Apply through layers of thin coats until a final coating exists of approximately 2 mils thick wet.

Related products

1 review for RexShield 1090 Metal Gelcoat
Be the first to review “RexShield 1090 Metal Gelcoat”