561-328-6691

How to Seal Rusted Metal & Products For Sealing Rusted Metal

How to Seal Rusted Metal

Metal products are an essential component of many aspects of our daily lives, from automobiles to household appliances.

However, metal objects are prone to rusting, which can weaken the structural integrity of the metal and make it unsightly. Rust is a result of the metal reacting with oxygen in the presence of water or moisture. Sealing rusted metal products can help to protect them from further rusting and improve their appearance.

Sealing rusted metal products involves a few essential steps.

The first step is to clean the metal surface.

Any dirt, debris, or loose rust needs to be removed from the surface before sealing. This can be done by using a wire brush or sandpaper to remove any loose rust and dirt. Afterward, a cleaner such as a degreaser can be used to clean the surface.

Once the metal surface is clean, the next step is to remove any remaining rust.

This can be done using a rust converter. Rust converters are chemicals that convert rust into a stable compound that can be painted over. The rust converter is applied to the rusted area, and it reacts with the rust, turning it into a black coating that can be painted over. After the rust converter has been applied and has dried, the metal surface can be primed.

Another factor that can contribute to rust stains on concrete is water.

When metal objects are exposed to water, it can accelerate the corrosion process. This is because water can increase the alkalinity of the concrete, making it more likely that a chemical reaction will occur. Now that we understand the causes of rust stains on concrete, what can be done to prevent them? One solution is to avoid placing metal objects directly on concrete surfaces. This can be accomplished by using rubber mats or other materials to cushion the metal object and prevent it from coming into direct contact with the concrete.

Priming the surface will help to ensure that the sealant adheres well to the metal surface.

A metal primer should be used for this purpose. Metal primers are specially formulated to adhere well to metal surfaces and help to prevent further rusting.

After the primer has dried, the metal surface can be sealed.

The RexShield metal sealing product is designed to seal both bare and painted metals. Unlike other metal sealers it both penetrates down into the metal while also creating an ultra-thin but super hard ceramic layer on its surface. The technology was originally developed to stop corrosive chemicals from dissolving metal pipes. It can now be used on ferrous steel, aluminum, copper, stainless steel and a variety of other metals. On painted metals it makes the surface harder and dramatically reduces oxidation and wear over time. It is commonly used on exterior light fixtures, railings, outdoor furniture, in marine environments and even on heavy machinery.

RexShield Metal Sealer

Try out a Metal Sealer sample here.

In conclusion

Sealing rusted metal products can help to protect them from further rusting and improve their appearance. The process involves cleaning the surface, removing any remaining rust, prepping the surface, and sealing it with a rust-inhibiting sealant. By following these steps, it is possible to extend the life of metal products and keep them looking their best.

Get a Quick Quote Here:

Search Tags:

Tags: how to seal rusted metal, metal sealing products

Share

Author

RexPro Sealers & Coatings

Recent Posts

Recent Posts

Have Any Question?

Just give us a call or send us a message and one of our knowledgeable RexPro Techs will be in touch with you as soon as possible.

RexPro’s V-Shield sealer offers a simple and easy way to restore and polish no-wax vinyl floors in medical facilities, schools and supermarkets throughout the US. It will leave the vinyl with a more non-slip surface that is much harder than the original no-wax vinyl floor.

Contact us for

MORE INFORMATION

to see what product is best for your needs!

RexPro Sealers & Coatings offers an innovative line of coatings for a variety of substrates such as Interior Flooring, All Vinyl Surfaces (VCT), Hardscapes (pavers, concrete, and building materials), Industrial and Residential, Boats and other Marine Vessels, and Oil and Gas.

561-328-6691

Add address

First name *

Last name *

Company name (optional)

Country / Region *

Street address *

Apartment, suite, unit, etc. (optional)

Town / City *

State / County *

Postcode / ZIP *